Fire Damage Repair and Reconstruction

Once the property is clean and dry, the burned parts get rebuilt: framing, roofing, drywall, wiring, windows, floors and finishes, with permits and inspections.

  • Framing, roofing, drywall
  • Permits and inspections
  • Homes and businesses
Firefighter clearing debris from a burned roof with exposed framing

Quick answer: Fire damage repair rebuilds what the fire destroyed after cleanup is done: structural framing, roof decking and shingles, drywall, insulation, wiring, windows, cabinets, floors and paint. Repairs usually need building permits and inspections. In homes built before 1978, the EPA requires paid contractors who disturb painted surfaces to follow lead-safe work rules.

What fire damage repair includes

  • Structural assessment of framing, joists, rafters and the foundation.
  • Framing repair: replacing or reinforcing charred studs, joists and rafters.
  • Roof repair: new decking, underlayment and shingles where fire or vent cuts damaged it.
  • Electrical and HVAC work by licensed trades where your state requires it.
  • Insulation and drywall replaced, taped and finished.
  • Windows, doors and siding replacing board-up panels.
  • Cabinets, flooring, trim and paint to match the rest of the home.
  • Permits and inspections with the local building department.

Fire damage repair by area of the house

AreaCommon damageUsual repair
RoofBurned decking, vent cuts, melted shinglesNew decking, underlayment, shingles
FramingCharred studs, joists, raftersReplace, sister or seal depending on depth
ElectricalMelted wire insulation, damaged panelRewire affected circuits; inspection
Walls and ceilingsBurned or soaked drywall, smoky insulationReplace, seal framing, finish
KitchenCabinets, counters, range hoodReplace cabinets, clean or replace hood duct
FloorsBurn marks, water cuppingRefinish or replace flooring and subfloor

The fire damage repair process

  1. Clean and dry first. Soot cleaning, odor removal and drying are finished before new materials go in, or new drywall picks up odor.
  2. Assess the structure. The crew checks how deep charring goes. Severe damage gets an engineer's review.
  3. Test older materials. The EPA recommends that suspect materials be sampled by an accredited asbestos inspector before renovation disturbs them.
  4. Write the scope and get approval. A line-item estimate goes to you and your adjuster.
  5. Pull permits. Structural, roofing, electrical and mechanical work is permitted with the local building department.
  6. Rebuild. Framing and roofing first, then rough-in trades, inspections, insulation, drywall and finishes.
  7. Final walk-through. You check every room against the scope before the job is closed.

Repair or rebuild?

Most fire-damaged homes are repaired, not torn down. A full rebuild is more likely when a large share of the framing burned, the roof collapsed, or the foundation cracked from heat. Your building official or a structural engineer makes that call. Insurance pays based on your policy's dwelling limit and whether it pays replacement cost or actual cash value.

Building codes, permits and licensed trades

Repairs must meet the codes your city or county enforces now, which may be stricter than when the house was built. That can mean new smoke alarms, wiring, egress windows or roof fastening. Most states and many cities require electrical, plumbing and HVAC work to be done by a licensed contractor, and many require a licensed general contractor for structural work. Ask who will hold the permit and check the license with your state.

Lead paint and asbestos in older homes

Lead-based paint was common in homes built before 1978, when it was banned for housing. The EPA's Renovation, Repair and Painting Rule requires anyone paid to disturb painted surfaces in those homes to follow lead-safe practices. Asbestos may be in old floor tile, ceiling texture, pipe wrap or siding. You cannot tell by looking, so testing before tear-out protects your family and the crew.

What affects the cost of fire damage repair

  • How much framing, roofing and wiring must be replaced.
  • Code upgrades required by your building department.
  • Finish level: cabinets, counters, flooring and fixtures.
  • Lead or asbestos testing and abatement.
  • Material prices and lead times in your area.

DIY or call a professional?

Painting a smoke-stained room after it has been cleaned and sealed can be a DIY job. Structural, roofing, electrical and gas work should not be. It needs permits and, in most places, licensed trades, and mistakes can void insurance or fail inspection.

Insurance notes

Ask your insurer whether your policy pays replacement cost or actual cash value, and whether it includes ordinance or law coverage for code upgrades. The NAIC lists additional living expenses among common coverages, which can pay for temporary housing during long repairs. Keep the repair estimate, change orders and receipts together. Before repairs, make sure fire damage cleanup and smoke odor removal are finished.

Fire damage repair questions

Can a fire-damaged house be repaired?

Most can. If the foundation and most of the framing are sound, burned sections are removed and rebuilt. A structural engineer or building official decides when damage is too severe and the house must be torn down and rebuilt.

How long does fire damage repair take?

Repairs after a small kitchen fire can take one to four weeks. A house with burned framing, roofing and wiring often takes three to nine months, including permits, insurance approval and material lead times.

Do I need a permit to repair fire damage?

Usually yes for structural, roofing, electrical, plumbing and HVAC work. Cosmetic work such as paint may not need one. Your city or county building department sets the rules, and a contractor that holds the permit handles the inspections.

Can burned wood framing be left in place?

Lightly scorched framing is sometimes cleaned, sealed and left, if an inspection shows it is still strong. Deeply charred members that lost strength are replaced or reinforced. Sealing with an odor-blocking primer stops leftover smell.

Does insurance pay to bring the house up to current code?

Only if your policy has ordinance or law coverage, which pays extra costs to meet current building codes during repairs. Many standard policies include a limited amount. Check yours and ask your agent.

Related fire damage services

Fire damage cleanup

Debris out, water from fire hoses removed, and burned materials torn out so restoration can start.

Board-up and roof tarping

Broken windows, doors and roof holes covered to keep out rain, animals and intruders.

Smoke odor removal

Smoke smell traced to its source, then treated with thermal fogging, hydroxyl or ozone.

Fire damage repair near you

Helpful guides

Sources

Last reviewed November 19, 2026 by SootMend Editorial. General information, not legal, insurance or professional advice. Read our editorial policy.

Fire or smoke damage at your property?

Call SootMend 24/7 to get board-up, soot cleanup and smoke odor removal started.

Call 1-800-555-0199
Call SootMend 1-800-555-0199