Restoration Basics

The Fire Damage Restoration Process, Step by Step

Fire damage restoration process guide graphic

Short answer: The fire damage restoration process runs in this order: inspection and assessment, board-up and roof tarping, water removal and drying, debris and tear-out, soot and smoke cleaning, contents cleaning, odor removal, and finally repairs and rebuilding. Cleanup after a small fire may take one to two weeks; a fire that burned structure can take several months including repairs.

Knowing what's coming makes a hard time a little easier. Crews arrive, windows get boarded, fans and air scrubbers run, walls may be opened up, and then the rebuild starts. Every job is different, but the order is nearly always the same. This guide explains each stage of fire damage restoration in plain words, so you can follow along and ask the right questions.

What is fire damage restoration?

Fire damage restoration is everything needed to return a home or business to its condition before the fire. It has two halves. Mitigation stops the damage from getting worse. Restoration and repair clean what can be saved and rebuild what can't. The industry standard for the cleaning side is ANSI/IICRC S700, first published in 2025. It covers inspection, cleaning and odor control, but not reconstruction, which is handled under building codes.

The fire damage restoration process, step by step

  1. Emergency contact and release. Work starts after the fire department releases the property. You call the restoration company and your insurer.
  2. Inspection and assessment. The crew walks every room, attic and crawl space. They map fire, smoke, soot and water damage, check the type of soot, and test older materials for lead and asbestos where needed.
  3. Board-up and roof tarping. Broken windows, doors and roof holes are covered so weather and intruders stay out.
  4. Water removal and drying. Water from fire hoses is pumped out, and air movers and dehumidifiers dry the structure.
  5. Debris removal and tear-out. Burned materials, wet insulation and drywall that can't be saved are removed.
  6. Soot and smoke cleaning. Every surface smoke touched is cleaned with HEPA vacuums, dry chemical sponges and the right wet cleaners for the soot type.
  7. Contents cleaning. Belongings are packed out, cleaned and stored, or cleaned on site after small fires.
  8. Odor removal. HVAC ducts are cleaned, then thermal fogging, hydroxyl or ozone treatment neutralizes odor that's left.
  9. Repairs and rebuilding. Framing, roofing, drywall, wiring, floors and paint are rebuilt with permits and inspections.

What happens at each stage

StageWhat you'll seeTypical length*
AssessmentCrew with lights, meters and cameras; photos of every roomHours
Board-up and tarpingPlywood on windows and doors; tarps on the roofHours to a day
Water removal and dryingPumps, air movers, dehumidifiers running3–5 days
Tear-outBurned and wet drywall, insulation and flooring removed1–3 days
Soot and smoke cleaningAir scrubbers, plastic containment, wall washingDays to 2 weeks
Contents cleaningBoxes, inventory lists, a moving truck1–4 weeks, in parallel
Odor removalEmpty house during fogging or ozone; duct cleaning1–4 days
RepairsPermits, framing, roofing, drywall, paintWeeks to months

*General ranges for planning, not promises. Your job's timeline depends on its size, insurance approval, permits and materials.

Why drying and cleaning happen fast

Two things get worse with time: water and soot. Fire hoses can leave a lot of water in a house. The EPA says wet building materials should be dried within 24 to 48 hours to prevent mold growth. Soot is acidic, so it keeps etching metal, glass and stone the longer it sits. That's why mitigation happens in the first days, even before every repair decision is made.

How long does fire damage restoration take?

How long fire damage restoration takes depends mostly on whether the structure burned.

  • Small kitchen fire, smoke in a few rooms: cleaning and odor work often take one to two weeks, plus minor repairs.
  • Fire in one room with smoke through the house: several weeks, including tear-out and rebuilding that room.
  • Burned framing, roof or wiring: often three to nine months, including permits, insurance approval and material lead times.
  • Total loss: a full rebuild, often a year or more.

Waiting on insurance approval and permits is often the longest part. Good documentation and a clear scope of work speed both up.

Safety steps inside the process

Older homes add steps. The EPA's Renovation, Repair and Painting Rule requires paid contractors who disturb painted surfaces in homes built before 1978 to follow lead-safe work practices. Older ceiling texture, flooring and pipe wrap may contain asbestos and should be tested before tear-out.

Odor treatment has its own rules. The EPA warns that ozone can damage the lungs and that no federal agency has approved ozone generators for occupied spaces. When crews use ozone after a fire, the home must be empty and aired out afterward. Our guide to hydroxyl generators, ozone and thermal fogging explains the options.

Restore or replace?

Usually restoredUsually replaced
Painted walls with smoke filmCharred drywall and framing
Hard flooring with light sootCarpet pad soaked with water or smoke
Dishes, glass, metalFood, medicine, cosmetics
Washable clothing and linensMelted plastics and heat-warped items
Finished wood furnitureInsulation that holds smoke

Your role during restoration

  • Approve the written scope before work starts.
  • Keep your adjuster in the loop on any added damage.
  • Point out heirlooms and important papers before pack-out.
  • Keep receipts for living expenses.
  • Do a final walk-through and check every room against the scope.

Wondering about price? See what affects fire damage restoration cost. If you're still in the first days, start with what to do after a house fire.

Local note: The process is the same nationwide, but local rules change the details: historic district reviews in Washington, DC, permit backlogs after wildfires in California, and frozen-pipe risk during winter jobs in Alaska.

When should you call a fire damage restoration professional?

  • Firefighters put water into the house.
  • Smoke or soot reached more than one room.
  • The roof, windows or doors are open.
  • Structure, wiring or the HVAC system may be damaged.

Ready to start restoration after a fire? Call 1-800-555-0199 and SootMend will handle every step, from board-up to rebuild.

Restoration process questions

What is the first step in fire damage restoration?

Securing the property: board-up of broken windows and doors and tarping of roof holes, after the fire department releases the site. An assessment happens at the same time, so the crew knows what needs to be done first.

What is the difference between fire damage mitigation and restoration?

Mitigation stops the damage from getting worse: board-up, water removal, drying and early soot cleaning. Restoration covers the full job, including cleaning, odor removal and repairs that return the home to how it was.

Can I live in my house during fire damage restoration?

Sometimes, after a small fire in one area. For larger fires, smoke, soot, odor treatment, tear-out and repairs usually make the home unlivable for a while. Ask your insurer about additional living expenses.

Does the restoration company work with my insurance?

Most do. The company documents damage, writes a line-item scope and shares it with your adjuster. You still choose who does the work, and you should read and approve the scope before work starts.

Sources

Related guides

Fire or smoke damage at your property?

Call SootMend 24/7 to get board-up, soot cleanup and smoke odor removal started.

Call 1-800-555-0199
Call SootMend 1-800-555-0199